Pagewise help
Everything the PDF editor can do and how to use it. New here? Read Getting started, then jump to whatever you need.
Getting started
- Open the editor and drop a PDF onto the page, or click to choose one.
- Pick a mode along the top (Edit, Comment, Redact or Fill & Sign), then a tool from the row below it.
- Click or drag on the page to use the tool. When something is selected, its settings (font, size, colour…) appear in the bar under the toolbar.
- Click Download (or press Ctrl/⌘ + S) to save a copy named yourfile-edited.pdf.
Your document is opened and edited only inside this browser tab. It is never uploaded anywhere.
Getting around: scroll through pages, use the zoom menu (50–300% or Fit width), and open the Pages panel to jump to a page. The pill at the bottom shows which page you are on.
Autosave: your work is kept in this browser as you go. The pill next to the file name shows Saved, Saving… or Not saved. If you close the tab or your computer restarts, open the editor again and click Resume to carry on where you left off, edits included.
Tip: The saved copy stays only in this browser and is never uploaded. It holds one document at a time, and it is not the PDF file itself: click Download to get that. On a shared computer, click Close in the editor (or Remove on the Resume card) when you're done, so nothing is left behind.
Language: switch between English and 한국어 with the button at the top of the page. Your choice is remembered in this browser.
Dark mode: the sun / moon button at the top switches between Same as device, Light and Dark. PDF pages always stay white, so you see them as they will print.
Phones and tablets: the tools sit in a bar at the bottom of the screen; zoom, Pages, Page tools, Find and Help are under ⋯ at the top. Pinch with two fingers to zoom the document. Tap beside the Pages list to close it.
Password-protected PDFs: you'll be asked for the password when you open one, here or in any other tool. The copy you download is a normal PDF without the password or its restrictions, so add protection again elsewhere if you need it.
Modes and tools
| Mode | Tools (shortcut key) | Use it to |
|---|---|---|
| Edit | Select & edit (V), Add text (T), Add image (I), Erase area (W) | Change the document itself: rewrite text, move or replace images, add text and pictures. |
| Comment | Highlight (H), Underline (U), Strikethrough (K), Sticky note (N), Text box (T), Draw (D), Rectangle (R), Ellipse (O), Line (L), Arrow (A) | Review and mark up a document. |
| Redact | Mark for redaction (X), Erase area (W) | Permanently black out sensitive content. |
| Fill & Sign | Signature (S), Add text (T), Date (G) | Fill in forms, sign and date. |
Every mode has Select (V) for picking, moving and resizing things you have added. Undo / Redo are always in the top bar and keep your full history.
Edit existing text
- In Edit mode with Select & edit, hover the page: editable paragraphs are outlined.
- Click a paragraph. It turns into a text box with the original wording, size, colour, bold/italic, alignment, line spacing and links.
- Type your changes. Click outside or press Esc when done.
Clicking alone changes nothing: the original text stays on screen exactly as it was until you type, and if you leave a paragraph without editing it, the page is untouched. Only once you change something is the paragraph redrawn: in the document's own font when it can be reused (see Fonts), otherwise in a similar one.
- Edit again: click the box once to select it, then click it again (or just click if it is already selected) to keep typing.
- Box size: the box grows as you type. A one-line heading or label gets wider instead of wrapping onto what is below it. Drag its corner and side handles to make it wider, narrower, taller or shorter. Handles stay visible while you type.
- Delete a paragraph: select it and press Delete, or use the bin on the small bar next to the box. The original text stays hidden; Undo brings it back.
- Overlapping boxes: only the words of an unselected box are clickable, so you can still click text sitting underneath a large box.
Tip: An edited paragraph is laid out again, so a changed line may wrap slightly differently from the original. Widen the box if a line breaks where you don't want it to.
Add text boxes
Choose Add text (T) and click where the text should go, then type. With a text box selected, the bar lets you change:
- Font and size, Bold / Italic
- Colour (preset swatches or a custom colour)
- Alignment (left, centre, right) and line spacing
- Link, Duplicate (Ctrl/⌘ + D) and Delete
Move a box by dragging it; resize it with its handles. In Fill & Sign, the Date tool (G) drops today's date as an editable text box.
Fonts
Built in: Helvetica / Arial, Times and Courier. You can also use your own fonts:
- Open the font menu and choose + Add or manage fonts…
- Upload font file (.ttf, .otf or .ttc; add the Bold and Italic files too if you want those styles), or Installed fonts to pick a font already on your computer (Chrome and Edge only).
- The font is remembered in this browser and embedded in the PDFs you save. It is never uploaded.
- Fonts from the document: when a PDF carries its own fonts, text you edit keeps that font, and the font menu lists them under From this document so you can use them for other text too. A PDF usually stores only the letters it already uses, so if you type a character the font doesn't have (or pick bold or italic when the document has no such cut), that paragraph switches to a similar built-in font and a message tells you why; remove the character and the original font comes back. Some fonts can't be reused at all (fonts that aren't embedded, or are stored as drawings, and some Korean, Japanese and Chinese fonts); those paragraphs use the similar font from the start.
- Default font: click the ★ next to the font menu, or tick Make the font I add my default, so every new text box starts in that font.
- One font for the whole document: choose Use one font for the whole document… from the font menu (or Aa Font for whole document when nothing is selected). Apply it to all text in the document (every paragraph becomes editable in that font, keeping size, colour, styles and links) or only text you've added or edited. One Undo reverses it.
- Korean, Japanese, Chinese and other scripts: add a font that contains those characters (for example Nanum Gothic or Noto Sans KR). If a character can't be drawn, the save window warns you which ones.
Links
- Existing links are kept. When you edit a paragraph that contains a link, the link stays on the same words and still works in the saved PDF.
- Web and email addresses you type become clickable automatically.
- Link some words: while typing, select the words and press Ctrl/⌘ + K (or click Link in the bar), enter the address and press Enter. With nothing selected, the whole box is linked.
- Link style: new links are blue with no underline. Untick Blue text or tick Underline to change that, or use the U toggle on each link in the Link menu.
- Manage links: the Link menu lists every link in the box. Edit an address, open it (↗) or remove it.
- Open a link: Ctrl/⌘ + click it on the page. It opens in a new window.
Images and erasing
- Add an image: Add image (I) and choose a picture. It appears in the middle of the page you're viewing; drag to move it and use the handles to resize. Opacity is in the bar.
- Existing images: in Edit mode, click an image already in the PDF to select it, then drag it, resize it, fade it or delete it. Selecting it changes nothing. When you move, resize or delete it, the picture is lifted off the page itself, so whatever was behind it shows again instead of a blank patch, and the saved file no longer contains it in the old spot. Where a picture can't be lifted cleanly (it has shapes or text drawn on top, is part of grouped artwork, or is tilted), its old spot is covered in the background colour and it moves together with what is drawn on it. Click a selected picture again to reach text or another picture lying on it.
- Erase area (W): drag a box to paint over anything with the page's background colour — handy for removing a stray line or logo. Text and pictures completely under the patch are also taken out of the saved file. For sensitive information, use Redact, which also removes anything only partly covered.
Comment and markup
- Highlight, Underline, Strikethrough: drag across the words. The marks snap to the lines of text.
- Sticky note (N): click to drop a note and type your comment. It is saved as a real PDF comment.
- Draw (D): freehand pen. Rectangle, Ellipse, Line and Arrow: drag to draw.
- Change colour, line width and opacity from the bar. Select any mark to move, nudge with the arrow keys, duplicate or delete it.
Arrange, align and copy style
- The small bar on a selected item: select anything — a text box, picture, shape, note or signature — and a small bar appears next to it with Duplicate, Copy style, Bring to front, Send to back and Delete.
- Right-click menu: right-click an item (or Ctrl + click on a Mac) for the same actions plus Bring forward and Send backward, each with its keyboard shortcut.
- Front and back: when things you added overlap, these decide which one is on top. The saved PDF keeps the same order. Erased areas and redactions always stay underneath.
- Copy style: copy the look of one item (font, size and colour of text; outline, fill and opacity of a shape) and use Paste style on another item of the same kind.
- Alignment guides: while you drag or resize an item, pink lines appear when its edges or centre line up with the page, with another item, or with text and pictures already in the PDF, and the item snaps into place. Hold Alt to position it freely.
- Duplicate existing content: duplicating a paragraph or picture that was already in the PDF makes a separate copy you can move anywhere; the original stays as it is.
Find in the document
- Press Ctrl/⌘ + F or click the magnifier in the top bar, then type a word or phrase. Upper and lower case don't matter.
- Every match is marked in yellow on the pages; the current one is orange. Enter or the down arrow goes to the next match, Shift + Enter or the up arrow to the previous one. The counter shows where you are, for example 3 / 12.
- Text you typed or changed is searched too, and text you deleted is left out. A phrase that is split across two lines is not found — search for part of it.
- Esc or the ✕ closes the search and removes the marks. Scanned pages have no real text to search.
Redact
- Switch to Redact mode and choose Mark for redaction (X).
- Drag over anything that must be removed: names, numbers, signatures, images.
- Download. Every page with a redaction is flattened into an image, so the hidden text can't be selected, copied or recovered. The original contents of that page are taken out of the file, along with its links, notes and form fields.
Tip: Flattened pages lose selectable text and may be larger. Redact only the pages that need it, and keep your original file.
Fill & Sign
- Forms: if the PDF has form fields, type into them, tick checkboxes and choose options right on the page. Your answers are written into the saved file. If a field can't be filled in, the save window names it so you can check it.
- Signature (S): Draw it with your mouse or finger, Type your name in a handwriting style, or Upload a picture of it. Pick a colour and click Use signature. It appears in the middle of the page you're viewing; drag it into place and resize as needed.
- Add text and Date fill in anything that isn't a form field.
Pages
Open the Pages panel from the top bar. For each page you can:
- Click the thumbnail to jump to it
- Rotate left or right
- Move it up or down
- Duplicate it. The copy keeps everything you added on the page, and the page's own links and comments. Form fields stay on the first copy only.
- Crop it
- Insert a blank page after it (+)
- Delete it
Crop: drag over the preview to mark the area to keep, or type how many millimetres to cut from each side, then choose This page or All pages. What is cut off is only hidden: it stays in the file, so use Redact for anything that must really go. Things you added that end up entirely outside the page are removed (Ctrl/⌘ + Z brings them back).
For bigger jobs — drag-to-reorder, extracting pages or adding pages from another PDF — use Organize Pages. There you can also duplicate a page. Merge keeps the bookmarks of every file, and Split gives each part the bookmarks of its own pages.
Page numbers, header & footer, watermark, OCR
Open Page tools in the top bar.
- Page numbers: pick one of six places, a style (1, 1 / 10, Page 1, Page 1 of 10, - 1 -), the first number, size, colour and distance from the edge. Tick No number on the first page for a cover page.
- Header & footer: type text into any of the six boxes (left, centre, right, top and bottom). {page} becomes the page number, {pages} the number of pages and {date} today's date.
- Recognise text (OCR): for scanned pages, which are pictures of text. Pick the language (English, Korean, or both) and Every page without text or This page. The text is read in your browser (about 5–15 seconds a page; the first time about 10 MB is loaded) and added to the PDF as invisible text: the page looks the same, but you can now click a paragraph to edit it, use Find, and select or copy text, also in the PDF you download. Pages with no text also show a Recognise text button. Check the result: recognition can misread some characters, and edited text is set in a look-alike font (change it in the font menu). Turn sideways or upside-down pages the right way first.
- Watermark: text, size, colour, opacity, diagonal or horizontal. It goes in the middle of every page, under everything you add, and can't be clicked on the page, so it never gets in the way. Change or remove it in Page tools.
Page numbers, headers and footers are ordinary text boxes: click one to move it or change its look. When you add, delete, duplicate or move pages, the numbers update by themselves (except a box whose text you typed over). Applying again replaces the old set, Remove takes it off every page, and Ctrl/⌘ + Z undoes either in one step.
Save and download
- Click Download or press Ctrl/⌘ + S. A progress bar shows while your changes are written into the PDF.
- In Your PDF is ready, click Download PDF. To check it first, click Compare before and after: each page without your edits next to the same page of the new PDF, side by side or on top of each other with a divider to drag (Swipe). It opens on the first page you edited; the numbers at the bottom jump to the others.
- Optionally send the result straight to Compress, Organize pages, To Word or To JPG, or click Keep editing.
Your original file is never changed. Text you add or edit stays real, selectable text, links stay clickable and fonts are embedded, so the PDF looks the same as in the editor, in any browser and on any device. The old wording of paragraphs you edited is removed from the saved file, not just hidden.
Keyboard shortcuts
| Ctrl/⌘ + Z | Undo |
| Ctrl/⌘ + Y or Ctrl/⌘ + Shift + Z | Redo |
| Ctrl/⌘ + S | Save / download the PDF |
| Ctrl/⌘ + + / −, or Ctrl/⌘ + mouse wheel | Zoom in / out |
| Ctrl/⌘ + D | Duplicate the selected item |
| Ctrl/⌘ + F | Find in document. Enter next match, Shift + Enter previous |
| Ctrl/⌘ + ] / [ | Bring the selected item forward / send it backward |
| Ctrl/⌘ + Shift + ] / [ | Bring it to the front / send it to the back |
| Ctrl/⌘ + Alt + C / V | Copy the selected item's style / paste it onto another item |
| Hold Alt while dragging | Move or resize freely, without snapping to the guides |
| Delete or Backspace | Delete the selected item |
| Arrow keys (Shift for 10×) | Nudge the selected item. A run of presses counts as one Undo step |
| Esc | Stop typing → deselect → back to the Select tool |
| Ctrl/⌘ + K (while typing) | Add a link to the selected words |
| Ctrl/⌘ + click a link | Open the link in a new window |
| Single letters (V T H …) | Switch tool — the letter is shown on each tool's tooltip |
Other PDF tools
Besides the editor, Pagewise has single-purpose tools. They also run entirely in your browser.
Troubleshooting
- I can't click a paragraph to edit it.
- Make sure you're in Edit mode with Select & edit (V). Scanned PDFs are pictures of text: use Page tools → Recognise text (OCR) first, then click the paragraph.
- Some characters are blank in my saved PDF.
- The font used doesn't contain them. Add a font that does (font menu → Add or manage fonts…) and save again. The save window lists the missing characters.
- My font isn't in Installed fonts.
- Listing installed fonts only works in Chrome and Edge, and you may need to allow font access for this site. In other browsers, upload the font file instead.
- Bold or italic is greyed out.
- Your own font only has the styles you added. Upload its Bold / Italic files in Add or manage fonts.
- I'm asked for a password, or told the PDF is protected.
- The PDF is encrypted. Type the password it was saved with. If the file has a separate "permissions" password and that one is refused, use the password that opens the document instead. A few older or unusual kinds of protection can't be opened here.
- I deleted something by mistake.
- Press Ctrl/⌘ + Z. Undo works for text, images, marks, page changes and whole-document font changes.
- Text runs past the bottom of its box.
- Drag the box's bottom handle down, or select the box and keep typing. It grows automatically.
- I closed the tab. Can I get my work back?
- Open the editor again and a Resume card appears. It only works in the same browser, and only the document you worked on most recently is kept.